ASTM A182 Alloy Steel F1 Flanges, CrMo F1 Pipe Flanges

F1 Alloy Steel Flanges, F1 Alloy Steel Weld Neck Flanges, Alloy Steel ASTM A182 F1 Flanges, Chrome Moly F1 Forged Flanges, CrMo F1 Slip On Flange Stockist, Alloy Steel UNS K12822 Pipe Flanges, Chrome Moly F1 Socket weld Flanges, Alloy Steel F1 Blind Flanges, Alloy Steel F1 Flanges Manufacturer in India.

Neelkamal Alloys LLP is a widely held manufacturer and exporter of AS F1 Flanges, which is generally used in Pulp and Paper Machinery, Heat exchangers, Fittings, Propeller shafts, Dyeing Machinery, Exterior Architectural parts in Marine Coastal Zones, etc. Soft and ductile, Alloy Steel F1 Slip On Flanges can be easily machined using most standard practices. Oxyacetylene welding is not suitable for this Alloy Steel F1 Threaded Flanges, which is also being offered in customized options. Applications that frequently use Alloy Steel F1 Weld Neck Flanges, but are not limited to: Steam nozzles, Partitions, Annealing boxes, Quenching racks and Fabrications that cannot be annealed after welding. Alloy Steel F1 Socket Weld Flanges may be stress relief annealed within the carbide precipitation range of 800 to 1500 Degree F without any danger of subsequent intergranualar corrosion.

Alloy Steel F1 Lap Joint Flange, DIN 1.5415 Threaded Flanges, F1 Alloy Steel Orifice Flange, ASME SA182 CrMo F1 RTJ Flanges Exporter, ASME B16.5 Alloy Steel F1 Spectacle Blind Flanges, Alloy Steel F1 Reducing Flanges, F1 Chrome Moly Weldo Flange, Alloy Steel F1 Long Weld Neck Flanges, CrMo F1 WNRF Flange Dealer, ASTM A182 Alloy Steel F1 SORF Flanges Supplier in Mumbai, India.

Quick Section Links

What is Alloy Steel F1 Flanges?
ASME B16.5 Alloy Steel F1 Flanges Specifications
ANSI B16.5 Alloy Steel F1 Pipe Flanges Forms & Availability
Types of Alloy Steel F1 Flanges
ASTM A182 F1 Alloy Steel Flanges Equivalent Grades
ASTM A182 F1 Alloy Steel Flanges Price List
F1 Alloy Steel Pipe Flanges Chemical Composition
Alloy Steel F1 Flanges Mechanical Properties
Other Types of Grade F1 Alloy Steel Flanges in Stock

Heat treatment is only suitable for specific grades of stainless steel, especially in Alloy Steel F1 Blind Flanges, which has corresponding corrosion resistance to sensitization as the low version of carbon. The hardening temperatures including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component, when heat treating these Alloy Steel F1 Spectacle Blind Flanges, which has excellent resistance to oxidation in recurrent service to 870 Deg C and in incessant service to 925 Deg C. Alloy Steel F1 Lap Joint Flanges retains its mechanical and physical properties with quite similar to customary grades.

ASME B16.5 Alloy Steel F1 Flanges Specifications

Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175.
Specifications	ASTM A182 / ASME SA182
Flanges size	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Flanges Dimensions	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange.
Class / Pressure	150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type	Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Manufacturing Standards	ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) Any other specilised Flange DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Standard UNI	6Bar 10Bar 16Bar 25Bar 40Bar
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Flanges uses & application	Nuclear power (mostly seamless). Petrochemicals and acids. Bitumen upgraders. Heavy oil refineries.

Call +91- 22- 66362225 / +91- 22- 66662225 OR

Email us at sales@neelkamalsteels.com for quick response

GET A QUOTE GET A QUOTE

ANSI B16.5 Alloy Steel F1 Pipe Flanges Forms & Availability

Products		Size
Alloy Steel F1 Plate Flanges	Alloy Steel F1 Ring Type Joint Flanges	Sizes 1/2" (15 NB) to 48" (1200NB)
Alloy Steel F1 Reducing Flanges	Alloy Steel F1 Slip On Flanges
Alloy Steel F1 Blind Flanges	Alloy Steel F1 Threaded Flanges
Alloy Steel F1 Long Weld Neck Flanges	Alloy Steel F1 Weld Neck Flanges
Alloy Steel F1 Spectacle Blind Flanges	Alloy Steel F1 Square Flanges
Alloy Steel F1 Orifice Flanges	Alloy Steel F1 Spade Flange
Alloy Steel F1 Raised Face Flanges	Alloy Steel F1 Weldoflange
Alloy Steel F1 High Hub Blind Flanges	Alloy Steel F1 SORF Flange
Alloy Steel F1 WNRF Flange	Alloy Steel F1 Socket Weld Flanges
Alloy Steel F1 Lap Joint Flanges	Alloy Steel F1 Flat Face Flanges
Alloy Steel F1 Puddle Flange	Alloy Steel F1 BLRF Flanges
Alloy Steel F1 SWRF Flanges	Alloy Steel F1 Screwed Flanges

Types of Alloy Steel F1 Flanges

Alloy Steel F1 Slip on Flange

Alloy Steel F1 Weld Neck Flange

Alloy Steel F1 Blind Flange

Alloy Steel F1 Socket Weld Flange

Alloy Steel F1 Threaded Flange

Alloy Steel F1 Orifice Flange

Alloy Steel F1 Long Weld Neck Flange

Alloy Steel F1 Spectacle Blind Flange

F1 Alloy Steel Spectacle Blind Flange | ASTM A182 Alloy Steel F1 Spectacle Blind Flange | ASTM A182 CrMo F1 Spectacle Blind Flanges | ASTM A182 Chrome Moly F1 Spectacle Blind Flanges | Alloy Steel F1 Raised Face Spectacle Blind Flanges | ANSI B16.5 F1 Alloy Steel Spectacle Blind Flanges | F1 Alloy Steel Spectacle Blind Flange.

Alloy Steel F1 Ring Type Joint Flange

ASTM A182 Alloy Steel F1 Flanges Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	EN	DIN
A182 F1	1.5415	K12822	1/2Mo	15M03

ASTM A182 F1 Alloy Steel Flanges Price List

Contact us or click on request a quote button to get our competitive prices for Alloy Steel F1 Flange. Neelkamal Alloys LLP maintain the large inventory of high quality ASTM A182 F1 Alloy Steel Flanges for sale to our clients throughout globally.

request a quote request a quote

Alloy Steel F1 Pipe Flanges Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo
Alloy Steel F1	0.15 max	0.3-0.6	0.5	0.03	0.03	4-6	0.44-0.65

Alloy Steel F1 Flanges Mechanical Properties

Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min
A182 F1	275	485	20

Pressure Rating Of Alloy Steel F1 Flanges

ANSI/ASME B16.34	PRESSURE RATING CHART
Temperature °F	150#	300#	400#	600#	900#	1500#	2500#
-20 to 100	275	720	960	1440	2160	3600	6000
200	230	600	800	1200	1800	3000	5000
300	205	540	720	1080	1620	2700	4500
400	190	495	660	995	1490	2485	4140
500	170	465	620	930	1395	2330	3880
600	140	435	580	875	1310	2185	3640
650	125	430	575	860	1290	2150	3580
700	110	425	565	850	1275	2125	3540
750	95	415	555	830	1245	2075	3460
800	80	405	540	805	1210	2015	3360
850	65	395	530	790	1190	1980	3300
900	50	390	520	780	1165	1945	3240
950	35	380	510	765	1145	1910	3180
1000	20	320	430	640	965	1605	2675
1050	20	310	410	615	925	1545	2570
1100	20	255	345	515	770	1285	2145
1150	20	200	265	400	595	995	1655
1200	20	155	205	310	465	770	1285
1250	20	115	150	225	340	565	945
1300	20	85	115	170	255	430	715
1350	20	60	80	125	185	310	515
1400	20	50	65	95	145	240	400
1450	15	35	45	70	105	170	285
1500	10	25	35	55	80	135	230

Size Chart Of Alloy Steel F1 Flange

Nominal Pipe Size	Outside Diameter of Flanges	Thickness of Flanges	Diameter of Raised Face	Diameter of Hub at Base	Length Thru Hub			Diameter or Bore		Diameter of Hub at Bevel	Radius of Fillet	Depth of Socket
	Outside Diameter of Flanges	Thickness of Flanges	Diameter of Raised Face	Diameter of Hub at Base	Welding Neck	Slip-On Threaded Socket	Lap Joint	Slip-on Socket	Lap Joint	Diameter of Hub at Bevel	Radius of Fillet	Depth of Socket
	O	Q	R	X	Y	Y	Y	W	B	H	r	Z
1/2	3-1/2	7/16	1-3/8	1-3/16	1-7/8	5/8	5/8	.88	.90	.84	1/8	3/8
3/4	3-7/8	1/2	1-11/16	1-1/2	2-1/16	5/8	5/8	1.09	1.11	1.05	1/8	7/16
1	4-1/4	9/16	2	1-15/16	2-3/16	11/16	11/16	1.36	1.38	1.32	1/8	1/2
1-1/4	4-5/8	5/8	2-1/2	2-5/16	2-1/4	13/16	13/16	1.70	1.72	1.66	3/16	9/16
1-1/2	5	11/16	2-7/8	2-9/16	2-7/16	7/8	7/8	1.95	1.97	1.90	1/4	5/8
2	6	3/4	3-5/8	3-1/16	2-1/2	1	1	2.44	2.46	2.38	5/16	11/16
2-1/2	7	7/8	4-1/8	3-9/16	2-3/4	1-1/8	1-1/8	2.94	2.97	2.88	5/16	3/4
3	7-1/2	15/16	5	4-1/4	2-3/4	1-3/16	1-3/16	3.57	3.60	3.50	3/8	13/16
3-1/2	8-1/2	15/16	5-1/2	4-13/16	2-13/16	1-1/4	1-1/4	4.07	4.10	4.00	3/8	7/8
4	9	15/16	6-3/16	5-5/16	3	1-5/16	1-5/16	4.57	4.60	4.50	7/16	15/16
5	10	15/16	7.5/16	6-7/16	3-1/2	1-7/16	1-7/16	5.66	5.69	5.56	7/16	15/16
6	11	1	8-1/2	7-9/16	3-1/2	1-9/16	1-9/16	6.72	6.75	6.63	1/2	1-1/16
8	13-1/2	1-1/8	10-5/8	9-11/16	4	1-3/4	1-3/4	8.72	8.75	8.63	1/2	1-1/4
10	16	1-3/16	12-3/4	12	4	1-15/16	1-15/16	10.88	10.92	10.75	1/2	1-5/16
12	19	1-1/4	15	14-3/8	4-1/2	2-3/16	2-3/16	12.88	12.92	12.75	1/2	1-9/16
14	21	1-3/8	16-1/4	15-3/4	5	2-1/4	3-1/8	14.14	14.18	14.00	1/2	1-5/8
16	23-1/2	1-7/16	18-1/2	18	5	2-1/2	3-7/16	16.16	16.19	16.00	1/2	1-3/4
18	25	1-9/16	21	19-7/8	5-1/2	2-11/16	3-13/16	18.18	18.20	18.00	1/2	1-15/16
20	27-1/2	1-11/16	23	22	5-11/16	2-7/8	4-1/16	20.20	20.25	20.00	1/2	2-1/8
24	32	1-7/8	27-1/4	26-1/8	6	3-1/4	4-3/8	24.25	24.25	24.00	1/2	2-1/2

Weight Chart Of Alloy Steel F1 Flanges

Nominal Pipe Size	Outside Diameter of Flanges	Thickness of Flanges	Diameter of Raised Face	Diameter of Hub at Base	Length Thru Hub			Diameter or Bore		Diameter of Hub at Bevel	Radius of Fillet	Depth of Socket
	Outside Diameter of Flanges	Thickness of Flanges	Diameter of Raised Face	Diameter of Hub at Base	Welding Neck	Slip-On Threaded Socket	Lap Joint	Slip-on Socket	Lap Joint	Diameter of Hub at Bevel	Radius of Fillet	Depth of Socket
	O	Q	R	X	Y	Y	Y	W	B	H	r	Z
1/2	3-1/2	7/16	1-3/8	1-3/16	1-7/8	5/8	5/8	.88	.90	.84	1/8	3/8
3/4	3-7/8	1/2	1-11/16	1-1/2	2-1/16	5/8	5/8	1.09	1.11	1.05	1/8	7/16
1	4-1/4	9/16	2	1-15/16	2-3/16	11/16	11/16	1.36	1.38	1.32	1/8	1/2
1-1/4	4-5/8	5/8	2-1/2	2-5/16	2-1/4	13/16	13/16	1.70	1.72	1.66	3/16	9/16
1-1/2	5	11/16	2-7/8	2-9/16	2-7/16	7/8	7/8	1.95	1.97	1.90	1/4	5/8
2	6	3/4	3-5/8	3-1/16	2-1/2	1	1	2.44	2.46	2.38	5/16	11/16
2-1/2	7	7/8	4-1/8	3-9/16	2-3/4	1-1/8	1-1/8	2.94	2.97	2.88	5/16	3/4
3	7-1/2	15/16	5	4-1/4	2-3/4	1-3/16	1-3/16	3.57	3.60	3.50	3/8	13/16
3-1/2	8-1/2	15/16	5-1/2	4-13/16	2-13/16	1-1/4	1-1/4	4.07	4.10	4.00	3/8	7/8
4	9	15/16	6-3/16	5-5/16	3	1-5/16	1-5/16	4.57	4.60	4.50	7/16	15/16
5	10	15/16	7.5/16	6-7/16	3-1/2	1-7/16	1-7/16	5.66	5.69	5.56	7/16	15/16
6	11	1	8-1/2	7-9/16	3-1/2	1-9/16	1-9/16	6.72	6.75	6.63	1/2	1-1/16
8	13-1/2	1-1/8	10-5/8	9-11/16	4	1-3/4	1-3/4	8.72	8.75	8.63	1/2	1-1/4
10	16	1-3/16	12-3/4	12	4	1-15/16	1-15/16	10.88	10.92	10.75	1/2	1-5/16
12	19	1-1/4	15	14-3/8	4-1/2	2-3/16	2-3/16	12.88	12.92	12.75	1/2	1-9/16
14	21	1-3/8	16-1/4	15-3/4	5	2-1/4	3-1/8	14.14	14.18	14.00	1/2	1-5/8
16	23-1/2	1-7/16	18-1/2	18	5	2-1/2	3-7/16	16.16	16.19	16.00	1/2	1-3/4
18	25	1-9/16	21	19-7/8	5-1/2	2-11/16	3-13/16	18.18	18.20	18.00	1/2	1-15/16
20	27-1/2	1-11/16	23	22	5-11/16	2-7/8	4-1/16	20.20	20.25	20.00	1/2	2-1/8
24	32	1-7/8	27-1/4	26-1/8	6	3-1/4	4-3/8	24.25	24.25	24.00	1/2	2-1/2

Other Types of Grade F1 Alloy Steel Flanges in Stock

Alloy Steel F1 Pipe Flanges
Alloy Steel F1 Reducing Flanges
F1 CrMo Slip On Flanges
F1 Alloy Steel Blind Flanges
AS UNS K12822 Socket Weld Flanges
CrMo WERKSTOFF NR. 1.5415 Flanges
ASTM A182 F1 Alloy Steel Weld Neck Flanges
Alloy Steel F1 Lap Joint Flanges
Alloy Steel F1 Threaded Flanges
Chrome Moly F1 Raised Face Flanges
F1 Alloy Steel Orifice Flanges
UNS K12822 Ring Type Joint Flanges
CrMo WERKSTOFF NR. 1.5415 Forged Flange
ANSI B16.5 F1 Alloy Steel Flat Face Flanges
Alloy Steel F1 SWRF Flange
Chrome Moly F1 SORF Flanges
Alloy Steel F1 NipoFlange
Chrome Moly F1 Weldo Flange
F1 Chrome Moly BLRF Flanges
F1 Alloy Steel WNRF Flanges
F1 CrMo JIS B2220 Flange
Alloy Steel F1 BS 4504 flanges
ASTM A182 Alloy Steel F1 Fq Square Flanges
F1 CrMo Loose Flanges
Alloy Steel UNS K12822 Flanges

Alloy Steel F1 Raised Face Blind Flanges
Alloy Steel F1 RTJ Flange
F1 Chrome Moly Exhaust Flanges
Alloy Steel F1 Tongue & Groove Flanges
Alloy Steel F1 Reducing Flanges
Chrome Moly F1 Plate Flanges
F1 Alloy Steel Puddle Flanges
AS UNS K12822 Male & Female Flanges
Alloy Steel F1 Ring Spacer
CrMo WERKSTOFF NR. 1.5415 Forged Flanges
ASTM A182 Alloy Steel F1 Bleed Ring Flange
Alloy Steel F1 Screwed Flanges
Chrome Moly F1 Square Flanges
F1 Chrome Moly BS 10 Flanges
F1 Alloy Steel BS 4504 Flanges
Chrome Moly UNS K12822 ASME B16.5 Flanges
AS WERKSTOFF NR. 1.5415 EN 1092-1 Flanges
Chrome Moly ASTM A182 F1 SAE Flanges
ASTM A182 Gr. F1 Alloy Steel RTJ Flanges
ANSI B16.5 F1 Alloy Steel ASME Flanges
Alloy Steel F1 EN 1092-1 Plate Flanges
Cr-Mo F1 5K SORF Flanges
Alloy Steel F1 PN 10 Flanges
Alloy Steel F1 Fq Expander Flanges
Alloy Steel F1 DIN 1.5415 Orifice Flange

Material

Products

Our Brochures