317 Stainless Steel Slip on Flange | ASTM A182 Stainless Steel F317 Slip on Flange | ASTM A182 F317 Slip on Flanges | ASTM A182 F317 SORF Flanges | SS 317 Raised Face Slip On Flanges | ANSI B16.5 F317 Stainless Steel SORF Flanges | F317 Stainless Steel Slip on Flange.
ASME SA182 F317 Flanges, 317 Stainless Steel Weld Neck Flanges, SS 317 Slip On Flange Manufacturer in India.
Neelkamal Alloys LLP is a widely held trader of ASME SA182 317 Flanges, which are suitable to be used for low pressure liquid delivery. Because of their high machinability and low cost, Grade 317 Slip On Flanges are available in highly tempered, hardened or unhardened forms. Stainless Steel 317/317L (UNS S31700/S31703) is a low carbon corrosion safe austenitic chromium-nickel-molybdenum stainless steel. The elevated amounts of these components guarantee the composite has predominant chloride setting and general corrosion resistance to the routine 304/304L and 316/316L evaluations. Stainless Steel 317 Threaded Flanges have useful resistance to dry atmospheres, fresh water and mild alkalies and acids, but less resistant than the equivalent non-free-machining grades. These Stainless Steel 317L Weld Neck Flanges does not respond to heat treatment, where cold work will cause an increase in both hardness and strength. Stainless Steel 317 Socket Weld Flanges is often used in Piping systems, Slurry tanks, Pressure vessels, Tanks, Valves, Stack liners, and so on. A182 317 Weld Neck Flanges is used in a wide variety of screw machine parts including nuts, bolts, screws, gears and pinions, valve trim, shafts and axles. Gr. 317 Socket Weld Flanges is composed of carbon, chromium, manganese, phosphorous, silicon, and sulfur. Stainless Steel 317 Blind Flanges is easily machined, is always magnetic, and has low frictional properties that reduce galling and seizing. SS 317 Spectacle Blind Flanges have same basic properties such as - good corrosion and oxidation resistance plus high strength in the hardened and tempered condition.
ASME SA182 SS 317 RTJ Flanges, Stainless Steel 317 Lap Joint Flange Supplier in Mumbai, India.
Quick Section Links
- What is Stainless Steel 317 Flanges?
- ASME B16.5 Stainless Steel 317 Flanges Specifications
- ANSI B16.5 Stainless Steel 317 Pipe Flanges Forms & Availability
- Types of Stainless Steel 317 Flanges
- ASTM A182 F317 Stainless Steel Flanges Equivalent Grades
- ASTM A182 F317 Stainless Steel Flanges Price List
- 317 Stainless Steel Pipe Flanges Chemical Composition
- Stainless Steel 317 Flanges Mechanical Properties
- Other Types of Grade 317 Stainless Steel Flanges in Stock
Gr 317 Orifice Flanges is normally used in all-purpose engineering and process instrumentation. Stainless Steel 317 Long Weld Neck Flanges is also used in Mining machinery, Ore Processing and more. SS 317 Slip On Flanges is a low carbon corrosion resistant austenitic chromium-nickel-molybdenum stainless steel. Increased levels of chromium, molybdenum and nickel in 317 Stainless Steel Flanges when compared to 316L stainless steel, it improves resistance to chloride pitting and general corrosion. Stainless Steel 317L Ring Type Joint Flanges is an advanced metal wire used to wrap your own coils for rebuildable atomisers. If extremely large grains are found after hardening somewhat cold-worked material, the strengthening temp in A182 317 Nippo Flanges must be reduced to 1200 Deg C till 1350 Deg F collection.
Dimensional Standards For Stainless Steel Flanges
- American Standard Flanges (ANSI/ASME/AWWA)
- European Standard Flanges (EN)
- German Standard Flanges (DIN)
- British Standard Flanges (BS)
- Japanese Standard Flanges (JIS)
- MSS Standard Flanges (MSS-SP)
- Petroleum Standard Flanges (API)
- South African Standard Flanges (SABS / SANS)
- Russian Standard Flanges (GOST)
Material Testing of Stainless Steel Flanges
- Mechanical Testing Such as Tensile of Area
- Chemical Analysis – Spectro Analysis
- Hardness Test
- Positive Material Identification – PMI
- Chemical Analysis – Spectro Analysis
- Testing
- Micro and MacroTest
- Flattening Test
- Pitting Resistance Test
- Intergranular Corrosion (IGC) Test
- Flaring Test
Documentation of Stainless Steel Flanges
- Commercial Invoice which includes HS Code
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- Packing List including net weight and gross weight, number of boxes, Marks and Numbers
- Raw Material Test Reports
- Fumigation Certificates
- Material Traceability Records
- Raw Material Test Reports
- Quality Assurance Plan (QAP)
- Material Traceability Records
- Heat Treatment Charts
- Quality Assurance Plan (QAP)
- Test Certificates certifying NACE MR0103, NACE MR0175
- Heat Treatment Charts
- Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
- Test Certificates certifying NACE MR0103, NACE MR0175
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- NABL approved Laboratory Test Reports
- Form A for the purposes of the Generalized System of Preferences (GSP)
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
ASME B16.5 Stainless Steel 317 Flanges Specifications
| Specifications | ASTM A182 / ASME SA182 |
|---|---|
| Flanges size | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Flanges Dimensions | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Manufacturing Standards | ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE,
BS Flange, EN Flange, API 6A Flange etc B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) Any other specilised Flange DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276 |
| Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Flanges uses & application | Nuclear power (mostly seamless). Petrochemicals and acids. Bitumen upgraders. Heavy oil refineries. |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175. | |
Stainless Steel 317 Pipe Flanges Standards
| ASME/ANSI B 16.5 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| ASME/ANSI B 16.36 | Welding Neck Flange, Slip on Flange, Threaded Flange |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
Call +91- 22- 66362225 / +91- 22- 66662225 OR
Email us at sales@neelkamalsteels.com for quick response
ANSI B16.5 Stainless Steel 317 Pipe Flanges Forms & Availability
| Products | Size | |
| SS 317 Plate Flanges | SS 317 Ring Type Joint Flanges | Sizes 1/2" (15 NB) to 48" (1200NB) |
| SS 317 Reducing Flanges | SS 317 Slip On Flanges | |
| SS 317 Blind Flanges | SS 317 Threaded Flanges | |
| SS 317 Long Weld Neck Flanges | SS 317 Weld Neck Flanges | |
| SS 317 Spectacle Blind Flanges | SS 317 Square Flanges | |
| SS 317 Orifice Flanges | SS 317 Spade Flange | |
| SS 317 Raised Face Flanges | SS 317 Weldoflange | |
| SS 317 High Hub Blind Flanges | SS 317 SORF Flange | |
| SS 317 WNRF Flange | SS 317 Socket Weld Flanges | |
| SS 317 Lap Joint Flanges | SS 317 Flat Face Flanges | |
| SS 317 Puddle Flange | SS 317 BLRF Flanges | |
| SS 317 SWRF Flanges | SS 317 Screwed Flanges | |
Types of Stainless Steel 317 Flanges
SS 317 Slip on Flange
SS 317 Weld Neck Flange
317 Stainless Steel Weld Neck Flange | ASTM A182 Stainless Steel F317 Welding Neck Flange | ASTM A182 F317 Weld Neck Flanges | ASTM A182 F317 WNRF Flanges | SS 317 Raised Face Weld Neck Flanges | ANSI B16.5 F317 Stainless Steel WNRF Flanges | F317 Stainless Steel Weld Neck Flange.
SS 317 Blind Flange
317 Stainless Steel Blind Flange | ASTM A182 Stainless Steel F317 Blind Flange | ASTM A182 F317 Blind Flanges | ASTM A182 F317 BLRF Flanges | SS 317 Raised Face Blind Flanges | ANSI B16.5 F317 Stainless Steel BLRF Flanges | F317 Stainless Steel Blind Flange.
SS 317 Socket Weld Flange
317 Stainless Steel Socket Weld Flange | ASTM A182 Stainless Steel F317 Socket Weld Flange | ASTM A182 F317 Socket Weld Flanges | ASTM A182 F317 SWRF Flanges | SS 317 Raised Face Socket Weld Flanges | ANSI B16.5 F317 Stainless Steel SWRF Flanges | F317 Stainless Steel Socket Weld Flange.
SS 317 Threaded Flange
317 Stainless Steel Threaded Flange | ASTM A182 Stainless Steel F317 Threaded Flange | ASTM A182 F317 Threaded Flanges | ASTM A182 F317 Screwed Flanges | SS 317 Raised Face Threaded Flanges | ANSI B16.5 F317 Stainless Steel Screwed Flanges | F317 Stainless Steel Threaded Flange.
SS 317 Orifice Flange
317 Stainless Steel Orifice Flange | ASTM A182 Stainless Steel F317 Orifice Flange | ASTM A182 F317 Orifice Flanges | ASTM A182 F317 Orifice Flanges | SS 317 Raised Face Orifice Flanges | ANSI B16.5 F317 Stainless Steel Orifice Flanges | F317 Stainless Steel Orifice Flange.
SS 317 Long Weld Neck Flange
317 Stainless Steel Long Weld Neck Flange | ASTM A182 Stainless Steel F317 Long Weld Neck Flange | ASTM A182 F317 Long Weld Neck Flanges | ASTM A182 F317 LWNRF Flanges | SS 317 Raised Face Long Weld Neck Flanges | ANSI B16.5 F317 Stainless Steel LWNRF Flanges | F317 Stainless Steel Long Weld Neck Flange.
SS 317 Spectacle Blind Flange
317 Stainless Steel Spectacle Blind Flange | ASTM A182 Stainless Steel F317 Spectacle Blind Flange | ASTM A182 F317 Spectacle Blind Flanges | ASTM A182 F317 Spectacle Blind Flanges | SS 317 Raised Face Spectacle Blind Flanges | ANSI B16.5 F317 Stainless Steel Spectacle Blind Flanges | F317 Stainless Steel Spectacle Blind Flange.
SS 317 Ring Type Joint Flange
317 Stainless Steel Ring Type Joint Flange | ASTM A182 Stainless Steel F317 Ring Type Joint Flange | ASTM A182 F317 Ring Type Joint Flanges | ASTM A182 F317 RTJ Flanges | SS 317 Ring Type Joint Flanges | ANSI B16.5 F317 Stainless Steel RTJ Flanges | F317 Stainless Steel Ring Type Joint Flange.
ASTM A182 F317 Stainless Steel Flanges Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 317 | 1.4449 | S31700 | SUS 317 | - |
ASTM A182 F317 Stainless Steel Flanges Price List
Contact us or click on request a quote button to get our competitive prices for 317 Stainless Steel Flange. Neelkamal Alloys LLP maintain the large inventory of high quality ASTM A182 F317 Stainless Steel Flanges for sale to our clients throughout globally.
317 Stainless Steel Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 317 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 - 20.00 | 3.00 - 4.00 | 11.00 - 15.00 | 57.845 min |
Stainless Steel 317 Flanges Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Pressure Rating Of 317 Stainless Steel Flanges
| ANSI/ASME B16.34 | PRESSURE RATING CHART | ||||||
| Temperature °F | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
| -20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
| 200 | 230 | 600 | 800 | 1200 | 1800 | 3000 | 5000 |
| 300 | 205 | 540 | 720 | 1080 | 1620 | 2700 | 4500 |
| 400 | 190 | 495 | 660 | 995 | 1490 | 2485 | 4140 |
| 500 | 170 | 465 | 620 | 930 | 1395 | 2330 | 3880 |
| 600 | 140 | 435 | 580 | 875 | 1310 | 2185 | 3640 |
| 650 | 125 | 430 | 575 | 860 | 1290 | 2150 | 3580 |
| 700 | 110 | 425 | 565 | 850 | 1275 | 2125 | 3540 |
| 750 | 95 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
| 800 | 80 | 405 | 540 | 805 | 1210 | 2015 | 3360 |
| 850 | 65 | 395 | 530 | 790 | 1190 | 1980 | 3300 |
| 900 | 50 | 390 | 520 | 780 | 1165 | 1945 | 3240 |
| 950 | 35 | 380 | 510 | 765 | 1145 | 1910 | 3180 |
| 1000 | 20 | 320 | 430 | 640 | 965 | 1605 | 2675 |
| 1050 | 20 | 310 | 410 | 615 | 925 | 1545 | 2570 |
| 1100 | 20 | 255 | 345 | 515 | 770 | 1285 | 2145 |
| 1150 | 20 | 200 | 265 | 400 | 595 | 995 | 1655 |
| 1200 | 20 | 155 | 205 | 310 | 465 | 770 | 1285 |
| 1250 | 20 | 115 | 150 | 225 | 340 | 565 | 945 |
| 1300 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
| 1350 | 20 | 60 | 80 | 125 | 185 | 310 | 515 |
| 1400 | 20 | 50 | 65 | 95 | 145 | 240 | 400 |
| 1450 | 15 | 35 | 45 | 70 | 105 | 170 | 285 |
| 1500 | 10 | 25 | 35 | 55 | 80 | 135 | 230 |
Size Chart Of Stainless Steel 317 Flange
| Nominal Pipe Size | Outside Diameter of Flanges | Thickness of Flanges | Diameter of Raised Face | Diameter of Hub at Base | Length Thru Hub | Diameter or Bore | Diameter of Hub at Bevel | Radius of Fillet | Depth of Socket | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Welding Neck | Slip-On Threaded Socket | Lap Joint | Slip-on Socket | Lap Joint | ||||||||
| O | Q | R | X | Y | Y | Y | W | B | H | r | Z | |
| 1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
| 3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
| 1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
| 1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
| 1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
| 2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
| 2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
| 3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
| 3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
| 4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
| 5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
| 6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
| 8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
| 10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
| 12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
| 14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
| 16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
| 18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
| 20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
| 24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
Weight Chart Of Stainless Steel 317 Flanges
| Pipe Normal Diam. | O.D. Flange | Thk. Of Flange Min | Diam. of Hub |
Diameter of Raised Face | Length Hub.Y | Thread Length | Diam. of Bolt Circle |
Diam. of Bolt Holes |
Number of Bolts |
Diam. of Bolts (inch) |
KG | LB | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| inch | dn | O | C | X | G | Y | T | BC | BH | BN | BD | ||
| 1/2" | 15 | 89.00 | 11.20 | 30.20 | 35.10 | 15.70 | 15.70 | 60.50 | 15.80 | 4 | 1/2" | 0.4 | 0.9 |
| 3/4" | 20 | 98.50 | 12.70 | 38.10 | 42.90 | 15.70 | 15.70 | 69.90 | 15.80 | 4 | 1/2" | 0.7 | 1.5 |
| 1" | 25 | 108.00 | 14.20 | 49.30 | 50.80 | 17.50 | 17.50 | 79.30 | 15.80 | 4 | 1/2" | 0.8 | 1.8 |
| 1-1/4" | 32 | 117.50 | 15.70 | 58.70 | 63.50 | 20.60 | 20.60 | 88.90 | 15.80 | 4 | 1/2" | 1.2 | 2.6 |
| 1-1/2" | 40 | 127.00 | 17.50 | 65.00 | 73.20 | 22.40 | 22.40 | 98.60 | 15.80 | 4 | 1/2" | 1.5 | 3.3 |
| 2" | 50 | 152.50 | 19.10 | 77.70 | 91.90 | 25.40 | 25.40 | 120.70 | 19.10 | 4 | 5/8" | 2.3 | 5.1 |
| 2-1/2" | 65 | 178.00 | 22.40 | 90.40 | 104.60 | 28.40 | 28.40 | 139.70 | 19.10 | 4 | 5/8" | 3.7 | 8.1 |
| 3" | 80 | 190.50 | 23.90 | 108.00 | 127.00 | 30.20 | 30.20 | 152.40 | 19.10 | 4 | 5/8" | 4.1 | 9 |
| 3-1/2" | 90 | 216.00 | 23.90 | 122.20 | 139.70 | 31.80 | 31.80 | 177.80 | 19.10 | 8 | 5/8" | 5.1 | 11.2 |
| 4" | 100 | 228.50 | 23.90 | 134.90 | 157.20 | 33.30 | 33.30 | 190.50 | 19.10 | 8 | 5/8" | 5.9 | 13 |
| 5" | 125 | 254.00 | 23.90 | 163.60 | 185.70 | 36.60 | 36.60 | 215.90 | 22.40 | 8 | 3/4" | 7 | 15.4 |
| 6" | 150 | 279.50 | 25.40 | 192.00 | 215.90 | 39.60 | 39.60 | 241.30 | 22.40 | 8 | 3/4" | 8.4 | 18.5 |
| 8" | 200 | 343.00 | 28.40 | 246.10 | 269.70 | 44.50 | 44.50 | 298.50 | 22.40 | 8 | 3/4" | 13 | 28.6 |
| 10" | 250 | 406.50 | 30.20 | 304.80 | 323.90 | 49.30 | 49.30 | 362.00 | 25.40 | 12 | 7/8" | 18 | 39.5 |
| 12" | 300 | 482.50 | 31.80 | 365.30 | 381.00 | 55.60 | 55.60 | 431.80 | 25.40 | 12 | 7/8" | 29 | 64 |
| 14" | 350 | 533.50 | 35.10 | 400.10 | 412.80 | 57.20 | 57.20 | 476.30 | 28.50 | 12 | 1" | 39 | 86 |
| 16" | 400 | 597.00 | 36.60 | 457.20 | 469.90 | 63.50 | 63.50 | 539.80 | 28.50 | 16 | 1" | 47 | 103 |
| 18" | 450 | 635.00 | 39.60 | 505.00 | 533.40 | 68.30 | 68.30 | 577.90 | 31.80 | 16 | 1 1/8" | 57 | 126 |
| 20" | 500 | 698.50 | 42.90 | 558.80 | 584.20 | 73.20 | 73.20 | 635.00 | 31.80 | 20 | 1 1/8" | 76 | 167 |
| 24" | 600 | 813.00 | 47.80 | 663.40 | 692.20 | 82.60 | 82.60 | 749.30 | 35.10 | 20 | 1 1/4" | 97 | 214 |
Other Types of Grade 317 Stainless Steel Flanges in Stock
- Stainless Steel 317 Pipe Flanges
- SS 317 Reducing Flanges
- 317 SS Slip On Flanges
- 317 Stainless Steel Blind Flanges
- SS UNS S31700 Socket Weld Flanges
- SS WERKSTOFF NR. 1.4449 Flanges
- ASTM A182 F317 Stainless Steel Weld Neck Flanges
- Stainless Steel 317 Lap Joint Flanges
- SS 317 Threaded Flanges
- 317 SS Raised Face Flanges
- 317 Stainless Steel Orifice Flanges
- SS UNS S31700 Ring Type Joint Flanges
- SS WERKSTOFF NR. 1.4449 Forged Flange
- ANSI B16.5 F317 Stainless Steel Flat Face Flanges
- Stainless Steel 317 SWRF Flange
- Stainless Steel 317 SORF Flanges
- Stainless Steel 317 NipoFlange
- SS 317 Weldo Flange
- 317 SS BLRF Flanges
- 317 Stainless Steel WNRF Flanges
- 317 SS JIS B2220 Flange
- 3 inch SS 317 Welding Neck 300 LBS Flange
- 317 Stainless Steel DN150 PN16 Flange
- Stainless Steel 317 EN 1092-1 Flange
- Stainless Steel 317 JIS B2220 Flange
- SS 317 Raised Face Blind Flanges
- SS 317 RTJ Flange
- 317 SS Exhaust Flanges
- Stainless Steel 317 Tongue & Groove Flanges
- SS 317 Reducing Flanges
- 317 SS Plate Flanges
- 317 Stainless Steel Puddle Flanges
- SS UNS S31700 Male & Female Flanges
- SS 317 Ring Spacer
- SS WERKSTOFF NR. 1.4449 Forged Flanges
- ASTM A182 Stainless Steel 317 Bleed Ring Flange
- Stainless Steel 317 Screwed Flanges
- SS 317 Square Flanges
- 317 SS BS 10 Flanges
- 317 Stainless Steel BS 4504 Flanges
- SS UNS S31700 ASME B16.5 Flanges
- SS WERKSTOFF NR. 1.4449 EN 1092-1 Flanges
- SS ASTM A182 F317 SAE Flanges
- ASTM A182 Gr. 317 SS RTJ Flanges
- ANSI B16.5 F317 Stainless Steel ASME Flanges
- SS 317 DIN 2566 PN10 Flanges
- SS 317 Male & Female Flanges
- Stainless Steel 317 BS 4504 Flanges
- 317 SS High Hub Blind Flanges
- SS 317 BS 4504 Flanges
